Stainless steel ball valve, 24-240V AC/DC, Rp 1"

Ball valve
• 2 additional limit switches
• Torque cut-off
• Variable voltage (equal or alternating current)
• Manual control
• Optional integrated frost protection heater

Material: 
Case: 1.4408
Bullet: 1.4408
Seal: Teflon(15% GF),

Temperature range: 
-20°C to max. +180°C

Scope:
Water, oil, compressed air, vacuum (max. -0.9 bar), fuels, solvents, corrosives, food, drinks

Optional: 
weld end -AS, 3.1b certificate

Actuator
Electric drive with optical position indicator, manual operation, switch room heating. Two additional limit switches are built in for other functions. An electronic torque limiter prevents damage due to overload. The hand control can be used without breaking the upholstery.

Temperature range: 
-10°C to max. +70°C

Tension: 
Type 24: 12-48 V AC/DC,
Type 220: 85-240 V AC/DC (drives are available with equal or alternating current)

Security: 
IP 65

Switch-on time: 
75%

Responsiveness: 
8 to 12 seconds

Optional: 
Response time 140 seconds -140

All statements are intended as non-binding guidelines! We are not liable for data selection not confirmed in writing. Pressure data, unless stated otherwise, relate to liquids from group II at +20 C.