3-way ball valve with gas wire, T1, 12 -24V AC/DC, PN40, Rp 2"

Ball valve

• 2 additional limit switches

• Torque shutdown

• Variable voltage (direct or alternating current)

• Manual operation

• Optional integrated frost protection heating

Ball valve

Material: Housing: brass nickel-plated, Ball: Brass chrome-plated, Seal: Teflon

Temperature range: -15 ° C to max. + 150 ° C

Application: Water, compressed air, oil, fuels, fuel oil, solvent, dyes, coatings, weak acids and bases.

Actuator

Electric drive with optical stand display, manual operation, switching room heating. Two additional limit switches are built in for other functions. An electronic torque limiter prevents damage due to overload. The manual control can be used without breaking down the cover.

Temperature range: -10 ° C to max. + 70 ° C

Voltage: Type 24: 12-48 V AC / DC, Type 220: 85-240 V AC / DC (drives are available with equal or alternating current)

Security: IP 65

Switch-on time: 75%

Response time: 8 to 12 seconds

Optional: Response time 140 seconds -140

All statements are intended as non-binding guidelines! We are not liable for data selection not confirmed in writing. Pressure data, unless stated otherwise, relate to liquids from group II at +20 C.