IconEnglish

Air-Saver, Ball Valve with Timer G 2", 230V AC

Article number: BVT7007

Airsaver G2 avec télécommande et câble

Air-Saver, Ball Valve with Timer G 2", 230V AC

Article number: BVT7007

Documents for Air-Saver, Ball Valve with Timer G 2", 230V AC

iconAirsaver G1 - Datasheet
iconAirsaver G2 - Datasheet
iconAirsaver G2 - Datasheet
Directly available

excl. VAT incl. VAT

Documents for Air-Saver, Ball Valve with Timer G 2", 230V AC

iconAirsaver G1 - Datasheet
iconAirsaver G2 - Datasheet
iconAirsaver G2 - Datasheet

Material:
Ball valve: nickel-plated brass Ball: stainless steel, Ball seals: FKM/PTFE, Drive housing: Plastic

Temperature range:
Medium: max. 100°C, Environment: max. 50°C

Media:
Compressed air and other neutral media.

Tension:
230/115V AC (Clock and program runs on battery)

Protection:
IP 54

Programming:
Up to 16 cycles per day, can be programmed down to the minute. Each weekday can be set separately.

Service:
Can be used with timer (automatic), manual (switch on timer) or manual (e.g. in case of power failure).

Advantage:
Energy savings through the automatic closing of the compressed air supply after working hours and the automatic opening when work starts again.

All statements are intended as non-binding guidelines! We are not liable for data selection not confirmed in writing. Pressure data, unless stated otherwise, relate to liquids from group II at +20 C.

TECHNICAL DATA

Female thread (G)

G 2"

Voltage

230V AC

Type

Standard

Installation length L

130

Work pressure (PN)

16 bar

Orifice (DN)

50 mm

Weight grams each
Commodity code84149000
HafnerFHTcmaticVacuproVan deurne