Prefilters Pneuparts, G 1/2", Series 2

Materials: 
Body: Grivory® (PA 66), seals: NBR, condensate container: polycarbonate 

Temperature range: 
-10°C to max. +50°C 

Input pressure: 
1.5 - 16 bar (model series 0: 1.5 - 12 bar) 

Condensate draining: 
Semi-automatic** (activated carbon filter without drainage) 

Media: 
Compressed air, neutral gases 

ATEX: 
Operating material without its own potential source of ignition in accordance with Directive 2014/34/EU (not model series 0 or differential pressure indicator / differential pressure gauge) 

Advantages: 
•simple assembly of single components using coupling kits within a model series. 

Application: 
Pre-filters are used where high requirements are placed for the purity of compressed air. Fine particles (> 0.3 µm), which can pass unhindered through the sintered filters, are separated here. Pre-filters are also installed in order to increase the service life of microfilters. 

Dust removal: 
> 0.3 µm (99.99 %) 

Optional: 
Version with metal bowl and inspection tube (model series 0: without inspection tube) -M, automatic discharge -AM, automatic discharge closed when not pressurised (0 to 16 bar, model series 0: 0 - 12 bar) -AMNC

*at 6 bar input pressure and 0,02 bar pressure loss, **As soon as the input pressure falls below the minimum. input pressure, the drain valve opens automatically. The semi-automatic drain valve can be prevented from opening by screwing the drain screw tight.