IconEnglish

Electrically operated 3/2 valve, DN 10, G 3/8" (air spring) NC without coil

Article number: MH310101G

Electrically operated 3-2 valve - DN 7

Electrically operated 3/2 valve, DN 10, G 3/8" (air spring) NC without coil

Article number: MH310101G

Documents for Electrically operated 3/2 valve, DN 10, G 3/8" (air spring) NC without coil

iconHafner valve specs
Directly available

excl. VAT incl. VAT

Documents for Electrically operated 3/2 valve, DN 10, G 3/8" (air spring) NC without coil

iconHafner valve specs

All valves are without solenoid coil and standard plug, which you have to order separately.


Material
: Housing: Aluminum, Gaskets: NBR, Pilot brass & stainless steel.
Temperature range: -10°C to max. +60°C.
Medium: Oiled and unoiled, filtered compressed air.
Duty cycle (at 5 bar): <25 ms.
Control voltage: Standard: 24V=, 230V 50/60 HZ.
Voltage tolerance: +/- 10%.
Power consumption: DC: 3 W, AC: 5 VA (50 HZ).

Operation: Normally Closed (MH)/ Normally Open (MOH)

Monostable valves require a continuous control signal to switch the valve. If this control signal is lost, the valve switches back to its resting position by means of spring force (air spring).


All valves are equipped with a solenoid coil and plug.

All statements are intended as non-binding guidelines! We are not liable for data selection not confirmed in writing. Pressure data, unless stated otherwise, relate to liquids from group II at +20 C.

TECHNICAL DATA

Thread

G 3/8"

Voltage

Without coil

Version

Monostable

Spring

Air spring

Function

3/2 NC

Orifice (DN)

10 L/min.

Flow

2250 l/min

Operation

Normally closed

Minimal pressure

1.5 bar

Maximum pressure

10 bar

Material

Aluminium (ALU)

Seal

NBR

Weight grams each
HafnerFHTcmaticVacuproVan deurne