Electrically actuated 3/2 valve normally closed, 1-G 1/8", 2-G 1/8", 3-M5

All valves are without solenoid coil and standard plug, which must be ordered separately.

Direct Acting Solenoid Valve | monostable | mechanical spring return | with manual bridging

Material: Housing: Aluminum, Gaskets: NBR, Pilot brass & stainless steel.
Temperature range: -10°C to max. +60°C.
Medium: Oiled and unoiled, filtered compressed air.
Duty cycle (at 5 bar): <25 ms.|
Control voltage: Standard: 24V=, 230V 50/60 HZ.
Voltage tolerance: +/- 10%.
Power consumption: DC: 3 W, AC: 5 VA (50 HZ).

Direct-controlled solenoid valve: In the valve, the solenoid pulls a ferromagnetic plunger towards itself. This plunger is attached to the sealing gasket. As a result, the bore is immediately opened or closed. No differential pressure is required (works from 0 bar). Directly actuated valves require a higher flushing capacity than indirectly actuated valves because the anchor has to be pulled up against the spring force and medium.

All statements are intended as non-binding guidelines! We are not liable for data selection not confirmed in writing. Pressure data, unless stated otherwise, relate to liquids from group II at +20 C.