Electrically operated 3/2 valve, G 3/8" (bistable), without coil

Solenoid valve | bistable | with manual override | G-series

Material: Housing: Aluminum, Seals: NBR, Pilot brass & stainless steel
Temperature range: -10 ° C to max. + 60 ° C.
Medium: Oiled and un-oiled, filtered compressed air.
Switch-on time (at 5 bar): <25 ms.
Control voltage: Standard: 230V 50/60 HZ, 110V/ 50Hz, 24V/ 50 Hz, 24V=, 12V=
Voltage tolerance: +/- 10%.
Power consumption: Direct current: 3 W, Alternating current: 5 VA (50 HZ).

 

Bistable valves can be permanently switched over by a short control signal. The valve remains in its position without a signal. The valve switches again by a control signal on the other side. A separate control is therefore required for each stand.

 

All valves are equipped with a magnetic coil and plug

All statements are intended as non-binding guidelines! We are not liable for data selection not confirmed in writing. Pressure data, unless stated otherwise, relate to liquids from group II at +20 C.