Precision throttle damper G 1/4 ", 1.4571

When compressed air escapes into the atmosphere, it produces noise. This can be prevented by installing a silencer.

These dampers are provided with a porous material. The air flows through the material and is distributed, reducing the noise level.

 

Type:

The precise throttle valve shaft, as used with angle throttle valves, serves as the basic body and therefore makes a very good flow setting. The large silencer surface of sintered metal reduces the air exhaust noise to a minimum.

 

Materials

Type MS nickel-plated: Throttle valve for hollow screws: Nickel-plated brass, seals and O-rings: NBR, silencer: Sintered metal bronze, type 1.4571: throttle valve for hollow screws: 1.4571, seals and O-rings: FKM, silencer: Sintered metal 1.4436

 

Operating Pressure:

max. 10 bar

 

Benefits:

• small installation dimensions, • accurate throttling, • low noise level

All statements are intended as non-binding guidelines! We are not liable for data selection not confirmed in writing. Pressure data, unless stated otherwise, relate to liquids from group II at +20 C.