Precision throttle damper G 1/8 ", 1.4571

When compressed air escapes into the atmosphere, it produces noise. This can be prevented by installing a silencer.

These dampers are equipped with a porous material. The air flows through the material and is distributed, reducing the noise level.

 

Type:

The precise throttle shaft, as used in angle throttle valves, serves as the base body and therefore makes a very good flow rate. The large sintered metal silencer surface reduces exhaust air noise to a minimum.

 

Materials:

Type MS nickel plated:
Throttling valve for hollow screws: Nickel-plated brass
Seals: NBR
O-rings: NBR
Silencer: Sintered metal bronze,

Type 1.4571:
Throttling valve for hollow screws: 1.4571
Seals: FKM
O-rings: FKM
Silencer: Sintered Metal 1.4436

 

Operating pressure:

Max. 10 bar

 

Advantages:

• Small footprint, •accurate throttling, •low noise level

All statements are intended as non-binding guidelines! We are not liable for data selection not confirmed in writing. Pressure data, unless stated otherwise, relate to liquids from group II at +20 C.