Straight cutting ring fitting 38 S, Zinc plated steel

Description

Type galvanized steel

 

Materials

Housing: Galvanized steel or available elastomer seal: NBR

 

Temperature range:

-40 °C to max. +120 °C (with elastomer seal: -35 °C to max. +100 °C)

-60 °C to max. +400 °C (with elastomer seal: -20 °C up to max. +200°C, NC couplings up to +550 °C on request)

 

Advantages:

• Compatible with any cutting ring coupling in accordance with DIN EN ISO 8434-1 (DIN 2353).
• Can also withstand dynamic loads such as vibrations and pulsations.
• Can be unscrewed and re-tightened as many times as desired.
• Unlike a cutting ring, the NC clamping ring is not hardened, so it cannot rust and has good chemical resistance.
• Lubrication of the threads of the nut is not necessary during initial assembly due to a silver coating.
• Vacuum density Q< 10^8 mbar l/>,
• Ideal for use in the gas and water industry

 

All statements are intended as non-binding guidelines! We are not liable for data selection not confirmed in writing. Pressure data, unless stated otherwise, relate to liquids from group II at +20 C.