Materials:
Body: die-cast zinc Z410 (model series 5 to 8: aluminium), diaphragms and seals: NBR, container: polycarbonate
Temperature range:
-10°C to +60°C
Input pressure:
1.5 - 16 bar
Condensate draining:
semi-automatic**
Media:
Compressed air, non-toxic and non-inflammable gases
ATEX:
Operating material without its own potential source of ignition in accordance with Directive 2014/34/EU
Advantages:
•automatic venting in the event of overpressure on the secondary side, •can be filled with oil while under pressure
Version:
Self-relieving filter regulator (with relieving) with attached lubricator
Pressure gauge connection:
G 1/8"
Switch panel thread:
M 30 x 1,5
Max. condensate amount:
16 cm³
Pore width in the filter:
5 µm
Reaction limit (6 bar):
40 l/min
Oil supply:
17 cm³
Oil metering at 250 l/min:
2 - 5 drops /10 min
Optional:
Design with metal bowl*** (1.5 - 25 bar) -M, automatic drain**** -AM, automatic discharge closed when not pressurised**** (0 - 16 bar) -AMNC
*Standard series, please use in preference, as the regulation range is universally applicable, **as soon as the inlet pressure falls below the minimum input pressure, the drain valve opens automatically. By screwing the drain screw tight, you can prevent the semi-automatic drain valve from opening, ***plastic drip cap, ****max. 16 bar when combined with a metal bowl