Filter regulator Pneuparts series 0, up to 1000 l / min

Version:

Self-relieving pressure regulator with additional filtering using the centrifugal principle and sintered filter

 

Materials:

Body: PA 66 GF60, spring hood: POM, diaphragms and seals: NBR, condensate container: polycarbonate

 

Temperature range:

-10°C to +50°C

 

Input pressure:

1.5 - 16 bar (model series 0: 1.5 - 12 bar)

 

Condensate draining:

semi-automatic**

 

Pressure gauge connection:

G 1/4" (model series 0: G 1/8")

 

Pore width in the filter:

5 µm

 

Media:

Compressed air, neutral gases

 

Advantages:

•Automatic venting in the event of overpressure on the secondary side,

•Easy assembly of individual components using coupling kits within a model series,

•Hand wheel can be locked by pressing down on it and bolted with a lock - please use VHS 20 (model series 0 cannot be locked).

 

Max. condensate amount:

16 cm³

 

Switch panel thread:

M 30 x 1,5

 

Scope of delivery:

Filter regulator including pressure gauge

 

Flow:

1000 l/min, secondary vent: 25 l/min

 

Optional:

Version with metal bowl and without inspection tube -M, automatic discharge -AM, automatic discharge closed when not pressurised (0 to 12 bar) -AMNC

 

*Standard series, please use in preference, as the regulation range is universally applicable, **as soon as the inlet pressure falls below the minimum input pressure, the drain valve opens automatically. The semi-automatic drain valve can be prevented from opening by screwing the drain screw tight, ***installation of a standard pressure gauge only possible with a pressure gauge adapter, display range of the compact pressure gauge: 0 to 12 bar, or 0 to 6 bar