Filter regulators, Pneuparts model series 2, up to 5,200 l/min

Version: 
Self-relieving pressure regulator with additional filtering using the centrifugal principle and sintered filter 

Materials: 
Body: Grivory® (PA 66), spring hood: POM, diaphragms and seals: NBR, condensate container: polycarbonate 

Temperature range: 
-10°C to max. +50°C 

Input pressure: 
1.5 - 16 bar (model series 0: 1.5 - 12 bar) 

Condensate draining: 
semi-automatic** 

Pressure gauge connection: 
G 1/4" 

Pore width in the filter: 
5 µm 

Media: 
Compressed air, neutral gases 

Advantages: 
•Automatic venting in the event of overpressure on the secondary side, •Easy assembly of individual components using coupling kits within a model series, •Hand wheel can be locked by pressing down on it and bolted with a lock - please use VHS 20 (model series 0 cannot be locked). 

Max. condensate amount: 
49 cm³ 

Switch panel thread: 
M 42 x 1,5 

Scope of delivery: 
Pressure regulator including 50 mm pressure gauge 

Flow: 
G 3/8": 4500 l/min, G 1/2": 5200 l/min, secondary vent: 70 l/min 

ATEX: 
Operating material without its own potential source of ignition in accordance with Directive 2014/34/EU 

Optional: 
Version with metal bowl and inspection tube -M, automatic discharge -AM, automatic discharge closed when not pressurised (0 to 16 bar) -AMNC, Safety version: with upstream lockable ball valve and filler valve -Si

*standard series, please use in preference, as the regulation range is universally applicable, **as soon as the inlet pressure falls below the minimum input pressure, the drain valve opens automatically. The semi-automatic drain valve can be prevented from opening by screwing the drain screw tight.