Pneuparts - 5/2 electrically actuated valves, bistable

Solenoid valve | bistable | with manual override | G Series

Suitable base plates for this series:
Pneuparts - Base plate for 5/2 and 5/3 electrically operated valves

Material:
Housing: Aluminum
Seals: NBR

Temperature range:
-10°C to max. +60°C.

Tension:
Without coil

Medium:
Oiled and unoiled, filtered compressed air.

Switch-on time (at 5 bar):
<25 ms.

Control voltage:
Standard:  230V 50/60 HZ, 110V/50Hz, 24V/50Hz, 24V=, 12V=

Tension tolerance:
+/- 10%

Power consumption:
Direct current: 3 W, AC: 5 VA (50 HZ).

Bistable valves can be permanently switched over by a short control signal. Without a signal, the valve remains in its position. The valve switches back by a control signal on the other side. A separate control is therefore required for each mode.