Refrigerant dryers coated, especially for the agricultural sector.
Are you looking for a dryer with a larger capacity? Please contact us.
Execution:
Mutlibrand Refrigerant Dryers Coated
Material:
Aluminum heat exchanger, steel-coated housing
Dew point:
3 to 7 degrees depending on the entry and ambient temperature.
Tension:
230V/ 50Hz/ phase 1
Refrigerant gas:
R314a / R410A0
Refrigerant dryers to meet your requirements
- During the compression process, a compressor converts moisture in the intake air into condensate. This causes wear and corrosion to the compressed air network and compressed air consumers. This can result in costly production interruptions and reduced efficiency and longevity of the equipment used. Dryers offer a solution.
- Refrigerant dryers use a refrigerant gas to cool the compressed air. This causes the water to condense from the air and can be removed so that a maximum pressure dew point of 3°C can be reached.
- Better compressed air quality: By using an air dryer, the quality of the compressed air and therefore your product improves.
All statements are intended as non-binding guidelines! We are not liable for data selection not confirmed in writing. Pressure data, unless stated otherwise, relate to liquids from group II at +20 C.
TECHNICAL DATA |
---|
|
Capacity | 350 l/min |
For compressor | 0 - 2.2 KW |
Connection | G 3/4" |
Maximum pressure | 16 bar |
Length mm. (L1) | 493 mm |
Width mm. (B) | 350 mm |
Height (H) | 450 mm |
Weight | grams each |
Commodity code | 84195080 |