IconEnglish

Electrically operated ball valve, double acting with gas thread, G1/2", 24-240V AC/DC, PN40

Article number: BV12ELI220

Brass nickel-plated ball valve with electric drive (industrial version) up to 40 barball valve with electric drive_ drawing

Electrically operated ball valve, double acting with gas thread, G1/2", 24-240V AC/DC, PN40

Article number: BV12ELI220

Directly available

excl. VAT incl. VAT

Ball valve
• 2 additional limit switches
• Torque cut-off
• Variable voltage (equal or alternating current)
• Manual control
• Optional integrated frost protection heater

Material: 
Housing: nickel-plated brass
Ball: Chrome-plated brass, Seal: Teflon

Temperature range:
-20°C to max. +180°C

Scope:
 
Water, compressed air, Vacuum (max. -0.9 bar), oil, fuels, fuel oil, solvent, dyes, coatings, weak acids and bases.


Actuator:
Electric drive with optical position indicator, manual operation, switch room heating. Two additional limit switches are built in for other functions. An electronic torque limiter prevents damage due to overload. The hand control can be used without breaking the upholstery.

Temperature range:
 
-10°C to max. +70°C

Tension: 
Type 24: 12-48 V AC/DC
Type 220: 85-240 V AC/DC (drives are available with equal or alternating current)

Security:
 
IP 65

Switch-on time: 
75%

Responsiveness:
 
8 to 12 seconds

Optional: Response time 140 seconds -140

All statements are intended as non-binding guidelines! We are not liable for data selection not confirmed in writing. Pressure data, unless stated otherwise, relate to liquids from group II at +20 C.

TECHNICAL DATA

Female thread (G)

G 1/2"

Installation length L

169

Work pressure (PN)

40 bar

Voltage

24-240V AC/DC

Orifice (DN)

15 mm

Weight grams each
HafnerFHTcmaticVacuproVan deurne