Mini filter regulator G 1/8", 0.5 - 3 bar

Version:

Self-relieving pressure regulator with additional filtering using the centrifugal principle and filter

 

Materials:

Body: die-cast zinc Z410 (model series 5: aluminium), diaphragms and seals: NBR, condensate container: polycarbonate (Model series Mini: spring hood: POM)

 

Temperature range:

-10°C to +60°C

 

Input pressure:

1.5 - 16 bar

 

Condensate draining:

semi-automatic**

 

Media:

Compressed air, non-toxic and non-inflammable gases

 

ATEX:

Operating material without its own potential source of ignition in accordance with Directive 2014/34/EU

 

Advantages:

•automatic venting in the event of overpressure on the secondary side, •hand wheel can be locked by pressing it down

 

Pressure gauge connection:

G 1/8"

 

Pore width in the filter:

5 µm

 

Max. condensate amount:

16 cm³

 

Switch panel thread:

M 30 x 1,5

 

Optional:

Other regulation ranges: 0.5 - 3 bar -3, 0.5 - 6 bar -6, 0.5 - 16 bar -16, design with metal bowl (1.5 - 25 bar) -M, automatic discharge*** -AM, automatic discharge closed*** (0 - 16 bar) -AMNC

 

*Standard series, please use preferentially as the regulation range can be applied universally, **as soon as the inlet pressure drops below the minimum input pressure, the drain valve opens automatically. By screwing the drain screw tight, you can prevent the semi-automatic drain valve from opening, ***max. 16 bar when combined with a metal bowl

All statements are intended as non-binding guidelines! We are not liable for data selection not confirmed in writing. Pressure data, unless stated otherwise, relate to liquids from group II at +20 C.