Mini air units, 2-piece., G 1/8", 0,5 - 16 bar

Materials:

Body: die-cast zinc Z410 (model series 5 to 8: aluminium), diaphragms and seals: NBR, container: polycarbonate

 

Temperature range:

-10°C to +60°C

 

Input pressure:

1.5 - 16 bar

 

Condensate draining:

semi-automatic**

 

Media:

Compressed air, non-toxic and non-inflammable gases

 

ATEX:

Operating material without its own potential source of ignition in accordance with Directive 2014/34/EU

 

Advantages:

•automatic venting in the event of overpressure on the secondary side, •can be filled with oil while under pressure

 

Version:

Self-relieving filter regulator (with relieving) with attached lubricator

 

Pressure gauge connection:

G 1/8"

 

Switch panel thread:

M 30 x 1,5

 

Max. condensate amount:

16 cm³

 

Pore width in the filter:

5 µm

 

Reaction limit (6 bar):

40 l/min

 

Oil supply:

17 cm³

 

Oil metering at 250 l/min:

2 - 5 drops /10 min

 

Optional:

Design with metal bowl*** (1.5 - 25 bar) -M, automatic drain**** -AM, automatic discharge closed when not pressurised**** (0 - 16 bar) -AMNC

*Standard series, please use in preference, as the regulation range is universally applicable, **as soon as the inlet pressure falls below the minimum input pressure, the drain valve opens automatically. By screwing the drain screw tight, you can prevent the semi-automatic drain valve from opening, ***plastic drip cap, ****max. 16 bar when combined with a metal bowl

All statements are intended as non-binding guidelines! We are not liable for data selection not confirmed in writing. Pressure data, unless stated otherwise, relate to liquids from group II at +20 C.