Electrically operated 3/2 valve, G 1/4" - MH 320 801

All valves are without solenoid coil and standard plug, which you must order separately. Order here

Solenoid valve | bistable | with manual override | G Series

Material:
Housing: Aluminum
Seals: NBR
Gaskets: brass & stainless steel.
Slide: Stainless Steel

Temperature range:
-10°C to max. +60°C.

Tension:
Without coil

Execution:
Bistable

Medium:
Oiled and unoiled, filtered compressed air.

Switch-on time (at 5 bar):
<25 ms.

Control voltage:
Standard: 230V 50/60 HZ, 110V/ 50Hz, 24V/ 50 Hz, 24V=, 12V=

Tension tolerance:
+/- 10%.

Power consumption:
Direct current: 3 W, AC: 5 VA (50 HZ).

Bistable valves can be permanently switched over by a short control signal. Without a signal, the valve remains in its position. The valve switches back by a control signal on the other side. A separate control is therefore required for each mode.

 

All statements are intended as non-binding guidelines! We are not liable for data selection not confirmed in writing. Pressure data, unless stated otherwise, relate to liquids from group II at +20 C.