Standard pressure regulator (volume booster) G 1", Model series 5

Application:

A remote controlled pressure regulator is used, when high flow rates are required with a constant pressure. The pressure regulator can also be used at inaccessible locations (e.g. in hazardous or ceiling areas). The setting is made using a pilot pressure regulator that can be placed anywhere. The regulated pressure corresponds to the pressure of the remote controlled bore.

 

Version:

Self-relieving (with secondary vent)

 

Materials:

Body: die-cast zinc Z410 (model series 5 to 8: aluminium), diaphragms and seals: NBR

 

Temperature range:

-10°C to +80°C

 

Pressure gauge connection:

G 1/4"

 

Media:

Oiled and unoiled compressed air, non-toxic and non-flammable gasses

 

ATEX:

Operating material without its own potential source of ignition in accordance with Directive 2014/34/EU

 

Advantages:

•Automatic venting in the event of overpressure on the secondary side, •High flow at constant pressure, •Remote-controlled pressure regulation using a pilot regulator (when using a precision pressure regulator as a pilot, it is possible to set the pressure very accurately)

 

Recommendation:

For best regulation results, please use the precision pressure regulator with feedback connection Type DRF 31-7 FB

 

Warning: Order accessories at the same time!

All statements are intended as non-binding guidelines! We are not liable for data selection not confirmed in writing. Pressure data, unless stated otherwise, relate to liquids from group II at +20 C.