Pneuparts polyurethane PU hose,8x5mm, Green, 25m.

Polyurethane (PU)(PUN) hose

Polyurethane is the most common pneumatic hose. Due to the high flexibility of the hose, it is especially suitable for machine and equipment construction. Because it recovers easily after kinking the hose. The Polyurethane hose is easy to calibrate and therefore perfect to use in combination with Push-in couplings, but also plug-in couplings or compression fittings are possible.

Small bending radius due to special flexibility, very good flexibility at low temperature and recovery properties, kink and wear resistant, resistant to aliphatic hydrocarbons and most lubricants, resistant to aging in oxygen, (min. bend radius is 10 x outer diameter). 

Material: 
Polyester-polyurethane 

Temperature range: 
-40°C to +60°C 

Shore Hardness: 
98 A 

Roll length: 
25 or 100 meters 

Guideline values for pressure use under temperature load: 
up to +20 °C: 100%, +30 °C: 80%, +40 °C: 68%, +50 °C: 57%, +60 °C: 50%

All statements are intended as non-binding guidelines! We are not liable for data selection not confirmed in writing. Pressure data, unless stated otherwise, relate to liquids from group II at +20 C.