IconEnglish

Pneumatic hoses PU PA PE

Pneumatic hoses PU PA PE

Polyurethane (PU) hose

Polyurethane is the most common pneumatic hose. Due to the high flexibility of the hose, it is especially suitable for Machine and Equipment construction. Because it easily recovers after kinking the hose. The Polyurethane hose is easy to calibrate and therefore perfect to use in combination with Push-in couplings, but also plug-in couplings or compression fittings are possible.

Temperature range: -35 ° C to + 60 ° C.

Roll length: 25 and 100m.

 

Polyamide (PA) hose

Polyamide hose has a chemical origin. PA is available in different variants PA 11, PA 12 and PA 6 are the most common ones. But PA 6.6 and Nylon P10 are also among the possibilities. PA 12 is also available in an antistatic, fire resistant or extra flex version. PA 12 is the standard and most common version. This hose is resistant to low temperatures and light. The raw material is produced according to DIN 73378/74324 with excellent aging properties, dimensionally stable at high temperatures and plasticizers.

Temperature range: -40 ° C to + 100 ° C.

Roll length: 50 and 100m

 

Polyethylene (PE) hose

Polyethylene hose, is available in two different types: Low Density Polyethylene (LDPE) and HighDensity Polyethylene (HDPE). LDPE is the most used variant. Both types are resistant to chemicals. The HDPE has a larger bending radius and can withstand higher pressures. PE hose is widely used in the agricultural sector where it is extremely suitable.

Temperature range: -10 ° C to + 60 ° C.

Roll length: 50 and 100m

HafnerFHTVacuproVan deurne