T-coupling push-in 8mm - R 1/8", PP

Materials:

Housing and release ring: Polypropylene

Thread: Polypropylene or stainless steel

Cartridge: Stainless steel

Seals: EPDM with PTFE coating

Locking claws: Stainless steel

 

Temperature range:

-20°C to +80°C

 

Operating pressure:

-0.95 to 9 bar (up to max. +20°C)

 

30°C: 6 bar

40°C: 5 bar

50°C: 4 bar

60°C: 3,4 bar

80°C: 3 bar

 

Media:

Oil-free compressed air, water (including demineralized), non-hazardous gases and liquids (no mineral oils)

 

Note:
Due to the mechanical properties of polypropylene, push-in fittings should not be exposed to increased mechanical stress. Return of opened packaging is excluded

 

Advantages:

• Simpler and more affordable than stainless steel push-in fittings
• Cleaned, assembled, and individually packaged in cleanroom (US FED 209D, class 10000 – ISO 14664-1 class 7)
• Threaded parts available in polypropylene or stainless steel
• Transparent body allows visual inspection of the medium inside the fitting

 

*Due to the high coefficient of expansion of polypropylene, leakage may occur under large temperature fluctuations. We recommend sealing with Loctite Thread Sealant 55 in this case

 

 

Click here for more information about Push-in fittings

 

All statements are intended as non-binding guidelines! We are not liable for data selection not confirmed in writing. Pressure data, unless stated otherwise, relate to liquids from group II at +20 C.