IconEnglish

Pneuparts filler valve, G 3/8", series 2

Article number: VUL382F

Filling units (change-over valves) Pneuparts series, up to 10000 l / minSwitch symbol

Pneuparts filler valve, G 3/8", series 2

Article number: VUL382F

Directly available

excl. VAT incl. VAT

Materials: 
Body: Grivory® (PA 66), cover: POM, seals: NBR 

Temperature range: 
-10°C to max. +50°C 

Media: 
Oiled and unoiled compressed air, neutral gasses 

Advantages: 
•Easy assembly of individual components using coupling kits within a model series, •Delivery includes an exhaust silencer, if necessary 

Input pressure: 
2,5 - 16 bar ( Baureihe 0: 2,5 - 12 bar) 

Function: 
The machines are allowed to breathe gradually via an orifice. Once the pressure reaches a value of approx. 50% of the input pressure and the cylinders have slowly moved into their initial position, the start-up valve switches over to maximum throughway. The speed of the pressure build-up can be controlled using an adjustment screw. 

ATEX: 
Operating material without its own potential source of ignition in accordance with Directive 2014/34/EU (not model series 0) 

Warning: 
Shut-off valves (e.g. ball valves) must be installed before the filler valve!

All statements are intended as non-binding guidelines! We are not liable for data selection not confirmed in writing. Pressure data, unless stated otherwise, relate to liquids from group II at +20 C.

TECHNICAL DATA

Thread

G 3/8"

Model series

Series 2

Height (H)

112 mm

Length (L)

63 mm

Optimal flow

4500 l/min

Height (H1)

58 mm

Weight grams each
HafnerFHTcmaticVacuproVan deurne