Air pipe systems steel - Geberit Mapress

Geberit press connection systems - Geberit Mepla and Geberit Mapress in various materials - can be used for compressed air systems. Geberit press connection systems have been used successfully for compressed air installations for more than 15 years. The durable density and reliability as well as the quick and easy assembly, ensures high-quality and cost-effective connection technology.

Geberit press connection systems: safe, reliable and economical

Safe and sustainable connections are the most important goal during the installation of a compressed air system. Moreover, quick and easy installation is important for the installer. The Geberit Mapress - Copper, C-steel and Mepla multi-layer plastic system with an aluminum inner pipe press system are perfectly tailored to these requirements.

Reliable: The required mechanical strength is achieved by pressing the press fitting and the tube. The permanent hydraulic density is obtained by the resilient action of the O-ring. The connection made is permanent and tensile and can be made quickly and easily with a Geberit press pliers.

Double safety: Due to the special design of the o-ring, the fittings leak during the pressure test, so that future damage during use can be prevented. Unpressed is therefore not closed In addition to the colored press indicators that each fitting has, it is immediately visible whether it has already been pressed or not yet. The press indicator will be released as soon as the fitting is pressed. So you have double security!

For compressed air applications the following materials can be chosen:

Geberit Mapress C-steel; internally and externally galvanized

Press fittings made of non-alloy steel 1.0034 E195 (EN 10305),

Galvanized outside, galvanized in combination with non-alloy steel system pipe E220

1.0215 (DIN EN 10305), internally and externally galvanized.

Available in diameters15 - 108 mm with TÜV approval.