2-part air units G 1/4", 0.2 - 6bar, Series 1

Version: 
Reversible filter regulator with attached lubricator (model series 0 with micro-mist lubricator) 

Materials: 
Body: die-cast zinc Z410 (model series 4 & 5: aluminium), spring hood: POM, diaphragms and seals: NBR, container: polycarbonate 

Temperature range: 
-10°C to max. +60°C 

Pressure gauge connection: 
G 1/4" (model series 0: G 1/8") 

Own air consumption: 
none (model series 4: max. 1.5 l/min, model series 5: max. 0.5 l/min) 

Pore width in the filter: 
5 µm (model series 5: 40 µm, upon request 8 µm) 

Condensate draining: 
semi-automatic**** 

Media: 
Compressed air, neutral gases 

Advantages: 
•Automatic venting in the event of overpressure on the secondary side, •Easy assembly of individual components using coupling kits within a model series and thread size, •Hand wheel can be locked by pressing down on it 

Input pressure: 
1,5 - 16 bar 

Max. condensate amount: 
25 cm³ 

Switch panel thread: 
M 30 x 1,5 

Lubricator reaction limit (6 bar): 
60 l/min 

Oil supply: 
50 cm³ 

Oil metering at 1000 l/min: 
approx. 1 - 2 drops/min 

ATEX: 
Operating material without its own potential source of ignition in accordance with Directive 2014/34/EU (not E-11 closure or electrical level monitoring) 

Optional: 
can be locked using a cylinder lock -K, can be locked using a cylinder lock with E 11 closure*** -KE11, version with protective cage -S, Version with metal bowl** and inspection tube -M, automatic discharge -AM, automatic discharge closed without pressure (0 to 16 bar) -AMNC, electrical level monitoring -N, Safety version: can be locked with upstream lockable ball valve and start-up valve -Si 

Advantages: 
•can be filled with oil while under pressure

*Standard series, please use preferentially as the regulation range can be applied universally, **drip cap made of metal/glass combination, ***Volkswagen locking system (delivered without a key), ****as soon as the inlet pressure falls below the minimum input pressure, the drain valve opens automatically. Screwing in the drain screw tightly prevents the semi-automatic drain valve from opening, *****measured at P1 = 10 bar, P2 = 6.3 bar and 1 bar pressure drop