5/3-way low energy solenoid valve, 12V DC, manifold version, bistable, closed center

Suitable base plates for this series:
Pneuparts – Base plate for 5/2 low energy valves, manifold

 

Materials:
Housing: Aluminium
Seals: NBR

 

Function:
5/3-way low energy (energy efficient) solenoid valve, manifold version, bistable
Exhaust-, closed- or pressure center

 

Temperature range:
-5 °C to +50 °C

 

Operating pressure:
0.15 - 0.7 MPa

 

Medium:
Filtered compressed air

 

Switching time:
30 ms

 

Flow:
381 - 761 l/min

 

Voltage:
12V DC and 24V DC

 

Voltage tolerance:
±10%

 

Insulation class:
Class F

 

Energy consumption:
Very low, because the coil does not need to remain continuously energized

Direct current (DC) = 0.95 W

 

Advantages:

• Less heat generation in the solenoid

• Energy saving, especially with large numbers of valves

 

Bistable valves can be permanently switched with a short control signal. Without a signal, the valve remains in its current position. The valve switches again when a control signal is applied to the other side. Therefore, each position requires a separate control

 

Click here for more information about pneumatic valves

All statements are intended as non-binding guidelines! We are not liable for data selection not confirmed in writing. Pressure data, unless stated otherwise, relate to liquids from group II at +20 C.