IconEnglish

2/2 way solenoid valve 48V AC, NC Indirect G 1/2" NBR

Article number: M21248VAC

2-2 way valves brass

2/2 way solenoid valve 48V AC, NC Indirect G 1/2" NBR

Article number: M21248VAC

Documents for 2/2 way solenoid valve 48V AC, NC Indirect G 1/2" NBR

icon2-2 solenoid valve brass.pdf
Directly available

excl. VAT incl. VAT

Documents for 2/2 way solenoid valve 48V AC, NC Indirect G 1/2" NBR

icon2-2 solenoid valve brass.pdf
Materials
Housing: Brass, internal parts: Brass / stainless steel, seal: NBR (Types with G 1/8 "and G 1/4": FKM)
Temperature range:
-10 ° C to max. +85 ° C (types with G 1/8 "and G 1/4": -10 ° C to max. +130 ° C), environment: -10 ° C to max. +50 ° C
Media:
Compressed air, neutral gases, water, neutral light media, heating oil, other media on request
Installation position:
with standing magnet
Tensions:
Standard: 24 V =, 230 V AC, if desired: other voltages
Protection class:
IP 65
Optional on request
FKM seal (-10 ° C to max. +130 ° C) -V, EPDM seal for air and hot water (-10 ° C to max. +120 ° C) -EP, EX-protected ** -EX
Information:
These valves are supplied with coils and plugs!
Pay attention:
Servo-controlled valves require a pressure difference between the valve inlet and outlet for opening or closing. The pressure difference is displayed as the minimum pressure. If pressure compensation occurs in the valve, possibly because little or no consumption is made at the valve outlet, the valve no longer works (opens or closes reliably)
* Water flow rate at +20 ° C, 1 bar pressure in valve inlet, free spout. Flow rate for air [l / min] approx. 13.4 x kv x P Input, when P Output <P Input / 2 (P Input and P Output are absolute values ​​in bar.), ** indicate protection class, only NC valves

Materials

Housing: Brass, internal parts: Brass / stainless steel, seal: NBR (Types with G 3/8 "and G 2": FKM)

 

Temperature range:

-10 ° C to max. +85 ° C (types with G 1/8 "and G 1/4": -10 ° C to max. +130 ° C), environment: -10 ° C to max. +50 ° C

 

Media:

Compressed air, neutral gases, water, neutral light media, heating oil, other media on request

 

Installation position:

with standing magnet

 

Tensions:

Standard: 24 V =, 230 V AC, if desired: other voltages

 

Protection class:

IP 65

 

Optional on request

FKM seal (-10 ° C to max. +130 ° C) -V, EPDM seal for air and hot water (-10 ° C to max. +120 ° C) -EP, EX-protected ** -EX

 

Information:

These valves are supplied with coils and plugs!

 

Pay attention:

Servo-controlled valves require a pressure difference between the valve inlet and outlet for opening or closing. The pressure difference is displayed as the minimum pressure. If pressure compensation occurs in the valve, possibly because little or no consumption is made at the valve outlet, the valve no longer works (opens or closes reliably)

 

* Water flow rate at +20 ° C, 1 bar pressure in valve inlet, free spout. Flow rate for air [l / min] approx. 13.4 x kv x P Input, when P Output <P Input / 2 (P Input and P Output are absolute values ​​in bar.), ** indicate protection class, only NC valves

All statements are intended as non-binding guidelines! We are not liable for data selection not confirmed in writing. Pressure data, unless stated otherwise, relate to liquids from group II at +20 C.

TECHNICAL DATA

Function

2/2 NC

Thread

G 1/2"

Voltage

48V AC

Seal

NBR

Workload

0.3-16 bar

Orifice (DN)

13 mm

Length (L)

67 mm

kv value

63 L/min.

Weight grams each
Commodity code84812090
HafnerFHTcmaticVacuproVan deurne