Reading a manometer seems simple, but in practice it often goes wrong due to an incorrect scale, an unclear pointer or a manometer that does not fit well with the application. Especially in an industrial installation, you want to be able to assess pressure correctly, so that you avoid problems, unnecessary wear and tear and downtime.
At Pneuparts, we see every day that business customers not only need a pressure gauge, but above all are looking for certainty. You want to know what the values mean, which model is suitable and when a pressure gauge deviates from what makes sense for your system. That is why in this article we clearly explain how to read a pressure gauge, what to look out for and how to choose the right pressure gauge for your installation.
Reading the pressure gauge: the basics you need to know
A pressure gauge measures pressure in a system, usually in bar, sometimes also in psi or other units. Most models show overpressure: the pressure relative to the atmosphere. This means that 0 bar on the pressure gauge does not always equal complete absence of pressure in an absolute sense, but equal pressure with respect to atmospheric pressure.
When reading a pressure gauge, you first look at the scale. After that, check which units are displayed. Many pressure gauges have a combined scale with bar and psi. Then look straight at the pointer, so that you avoid parallax errors. If you look at it at an angle, you can read the pressure incorrectly.
An analog pressure gauge uses a pointer to indicate pressure. A digital pressure gauge works differently. Digital pressure gauges measure pressure via electronic sensors and show the values on a digital display. As a result, digital pressure gauges are often easier to read, especially in situations where speed and accuracy are important.
Reading analogue pressure gauges: pay attention to pointer, scale and zones
Analog pressure gauges are still widely used in compressed air, water pressure, hydraulics, and boiler applications. They are often reliable, easy to use and available in different versions. Yet analogue reading requires extra attention.
First check whether the needle is set to zero in a pressureless system. If the pointer is not there, there may be wear, deformation or a deviation in the measurement. Then check the graduation. Some analogue pressure gauges are divided into 0.2 bar increments, others into larger increments. So don't be guided by a quick glance, but read the correct marking.
Many analog pressure gauges have colored zones. The green area usually indicates the normal working pressure. The red zone means that the pressure is higher than desired and that overpressure can occur. With a boiler or central heating boiler you often see that a normal value is around 1.5 to 2 bar. If the pressure exceeds 2.5 bar, a problem may arise. This information is not only useful for home installations, but also for industrial applications in which you want to assess pressure correctly.
Why the Position of the Hands is Sometimes Misinterpreted
The pointer seems clear, but the reading often goes wrong. This is usually because someone uses the wrong scale, reads the pressure gauge from an angle or does not know enough about the range associated with the application. With a model with bar and psi next to each other, you have to check carefully which scale you use.
In addition, the diameter of the pressure gauge plays a role. A small pressure gauge with a difficult range is more difficult to read than a larger model with a clear dial. In a panel or on a pipe at eye level, that makes a lot of difference. Especially if you have to check regularly, a larger diameter helps to work faster and clearer.
Digital pressure gauges: when are they more convenient than analogue models?
Digital pressure gauges are increasingly used in industrial processes, laboratories and applications where high accuracy is required. They offer high precision in pressure measurements and often have additional features, such as peak pressure recording, signals, or a multi-unit digital readout.
An important advantage is that digital pressure gauges are easier to read than analogue models. You can immediately see which value is displayed, without interpreting a pointer or scale. This can work especially well with fluctuating pressure, constant pressure or measurement of high pressure.
However, an analogue pressure gauge is not automatically less suitable. In harsh environments, in vibrations or when power supply and electronics are undesirable, an analogue pressure gauge is still often used. The right model therefore depends on the specific application, the environment and the desired functions. Digital pressure gauges are suitable for laboratory and industrial applications, but analogue pressure gauges remain a practical choice in many cases.
Extra features that really make a difference in practice
Digital pressure gauges often have additional functions that are useful in maintenance and process monitoring. Think of a digital display with min. and max. values, peak registration or signals as soon as a set limit is reached. This allows you to detect problems faster and better determine what is happening in a system.
In some processes, such a digital readout helps to see a change in pressure immediately, while an analogue pointer seems less precise in this respect. Plus, you can often switch between bar, psi, and other units. This makes digital pressure gauges interesting for international installations, test setups and specialist measurements.
Choosing the right pressure gauge for your application
Choosing the right pressure gauge starts with the pressure range. A pressure gauge measures best when the normal working area is in a logical part of the scale. If you use 6 bar as standard, a model from 0 to 10 bar is often more suitable than a variant up to 25 bar. The values are then easier to read and you can better assess the pressure.
In addition, you pay attention to the application. Different requirements apply to water pressure, hydraulics, compressed air, gas or vacuum. For example, diaphragm versions are suitable for corrosive liquids, while a bourdon tube pressure gauge is usually applied for general pressure measurement. The bourdon tube is the most commonly used technique. Such a tube deforms due to pressure, after which that movement is converted into a deviation of the pointer. Models with a bourdon tube can be used up to 1600 bar, depending on the version.
Materials are also important. You can choose from brass, stainless steel or combinations thereof. In humid or aggressive environments, stainless steel is often desirable. Glycerin also plays a role. A glycerin-filled model dampens vibrations, keeping the pointer calmer and improving readability. This is a smart choice, especially with a pump, a moving installation or in environments with vibrations.
Anyone who uses a pressure gauge within a compressed air installation often also looks at components for control, measurement and filtering. If you work with vacuum applications, it is also logical to also look at suitable parts within vacuum technology .
Bottom connection or rear connection: which fits better?
The connection determines how you can mount the pressure gauge. A bottom connection is often used on pipes, a tap, a pump or directly on a system. A rear connection fits well when mounted in a panel or cabinet, where the pressure gauge is connected to the back.
Also, check the thread size, such as female threads, and see if reducers are needed. A good seal is important to prevent leakage. In addition, pay attention to the diameter, the place of assembly and the available space. This prevents you from having chosen the right pressure gauge, but not being able to easily place it or read it properly in practice. To choose the right connection size and wire type, a conversion table for various wire sizes can be very useful.
This is how you read a pressure gauge in 5 clear steps
Reading a pressure gauge is faster and more accurate if you follow a fixed order. With these steps, you can usually immediately see whether the installation is working within the right range.
- Check the units
First, see if the pressure gauge displays pressure in bar, psi, millibar or other units. A misinterpretation often starts here.
- View the scale
See how much each step on the scale means. This allows you to read more accurately and you know whether the values are logical.
- Look straight at the hand
Always look straight ahead. This prevents the pointer from appearing to have a different position due to the viewing angle.
- Compare with normal working pressure
Check that the pressure reading is appropriate for the application. A pressure gauge only provides information; You have to determine whether the value makes sense for the process.
- Watch out for anomalies
If the pointer fluctuates greatly, the pressure remains higher than expected or the needle is not at zero with a depressurized system, there may be wear, deformation, leakage or a problem in the installation.
When should you check a pressure gauge?
Sometimes you read a pressure gauge and the value does not match what you expect. Then the pressure gauge does not have to be defective immediately, but it is smart to check further. For example, temperature affects pressure. The pressure can vary due to temperature fluctuations, especially with a closed system with gas or liquid.
Extreme temperatures can also affect the lifespan of a pressure gauge. In addition, a pressure gauge may be exposed to vibrations, pulsations or contamination. In that case, a glycerin-filled model often works more stable. If you see an illogical course, check the pipe, the tap, the pump and the connection.
If your pressure gauge deviates from the expected value, look at the entire system. Is the pressure switch set correctly, is there overpressure, is there water or air stuck somewhere, or is venting necessary? Regular checks help to prevent damage and problems. This is not only important for operation, but also for safety and sustainability. In many systems, components such as pressure and vacuum switches as well as safety valves and pressure relief valves also play an important role.
Practical choice at Pneuparts
At Pneuparts you will find a wide range of pressure gauge versions for pneumatics, water, hydraulics and general pressure measurement. The range is aimed at business applications, where you often want to quickly determine which model suits your installation, pressure range and connection.
You can choose from analogue and digital pressure gauges, models with bottom connection or rear connection, different diameters and materials such as brass or stainless steel. Accessories, reducers and products for assembly are also available. If you can't figure it out right away, we are happy to help you with expert advice and technical support. This makes it easier for you to find the right pressure gauge for your application and you can immediately continue with your process.
If you work within a complete compressed air setup, it is smart to look not only at the pressure gauge, but also at the rest of the installation, such as compressors, dryers, boilers and parts or a suitable air line and hose reel.
Fast to the right reading and the right choice
Reading a pressure gauge starts with looking closely, but ends with a good product choice. Pay attention to the scale, units, pointer, diameter, and pressure range. Then determine whether analogue or digital pressure gauges are better suited to your situation. If you work with vibrations, high pressure, water pressure or a fragile liquid, material, glycerine and connection also count.
If you want to replace a pressure gauge or find the right model for your installation right away, take a look at the Pneuparts range or ask for technical advice. We are happy to help you with a practical solution, so that you can measure pressure correctly and order directly.
If you delve further into pressure measurement and compressed air components, additional knowledge articles can also be useful. You can read more about the basics of compressed air and pneumatics, the operation of pneumatic valves and practical topics within technical knowledge. This gives you a better picture of not only the pressure gauge, but your complete installation.
Frequently Asked Questions (FAQ)
How do you read a pressure gauge in bar correctly?
First check which scale is indicated in bar. Then read straight to the pointer, so you don't make a viewing error. Also check whether the reading fits the normal range of your system. With a combined scale with bar and psi, it is important that you use the right unit.
What is the difference between analog and digital pressure gauges?
Analogue pressure gauges work with a pointer and are often robust and simple. Digital pressure gauges measure via sensors and show the pressure on a digital display. As a result, they are usually easier to read and often offer additional features, such as peak recording or multiple units on the same screen.
When to choose a pressure gauge with glycerin?
A pressure gauge with glycerine is mainly chosen for vibrations, pressure pulses or restless conditions. The padding dampens the movement of the pointer, allowing you to read better. Moreover, this can help to limit wear and tear. Such models are often used on a pump, machine or mobile installation.
Which pressure gauge is suitable for water pressure or hydraulics?
That depends on the pressure range, the connection and the medium. A standard pressure gauge is often used for water pressure, but in hydraulics the pressures are usually higher and other materials or designs are needed. Therefore, pay attention to bar, material such as stainless steel or brass, and to the application within your installation.
Why is a pressure gauge not exactly at zero?
This can have various causes. Sometimes there is still residual pressure in the system. In other cases, it indicates wear, deformation, or a deviation in the measuring mechanism. If the needle is structurally not at zero while the system is depressurized, it is wise to check the pressure gauge and the installation extra.
|
 |
Back to knowledge pages