MORE INFORMATION

2/2-way stainless steel solenoid valves, NC, pilot-operated, G 1/2" to G 2", DN13-50

STANDARD SUPPLIED WITH PLUG

Materials:
Housing: Stainless steel
Seals: FKM, EPDM

Function:
Solenoid valve 2/2-way or 3/2-way
Pilot-operated, normally closed (NC)

Thread:
G 1/2'', G 3/4'', G 1'', G 1 1/4'', G 1 1/2'' and G 2"

Nominal diameter (DN):
From 13 mm to 50 mm

Operating pressure:
0,5 to 16 bar
Note: depending on nominal diameter (DN)

Kv:
From 3.84 m³/h to 40.94 m³/h

Temperature range:
FKM: -10 °C to +160 °C
EPDM: -10 °C to +160 °C

Advantages:

Solenoid valves open and close very quickly compared to many other types of shut-off valves
Delivered including coil and connector
EPDM is suitable for (hot) water, neutral liquids, and many chemicals
Good environmental protection thanks to IP65 rating

Disadvantages:

Not suitable for low pressure differences (< 0.5 bar). For low pressure or vacuum, consider a (semi-) direct solenoid valve or another type such as an electric ball valve
EPDM is not suitable for oils and greases
Solenoid valves are very sensitive to dirt and can only be used with clean liquids and gases
Solenoid valves consume energy when activated and the coil can become hot. To dissipate heat, proper ventilation of the installation environment is recommended